Flat groove welding carriage

Flat fillet welding carriage

Pipe horizontal welding carriage

Vertical welding carriage

Double side welding carriage

Custom-made welding carriage

HK-6A-II Portable Wel-Twin Double Side Welding Tractor Carriage Two Torch

Our company’s multifunction angle weld trolley is wonderful. It has many functions. It can make the person, who isn’t proficient, do angle weld easily. Chief characters are following:Small capacity, low gravity center, lightweight, portable.High magnetism magnet increases dependability of operating and draft load to assure the machine operates smoothly. It can operate many machines on the base of increase dependability of operating and self-stop function.

Send an enquiry

Video

Description

Name and function of each section

1） Adjusting gliding block of torch

You can use this equipment to adjust arc starting point toward up/down, front/rear. Each distance of run is 45mm.

2） Locking equipment of torch: You must make sure the torch is locked when you assemble it.

3） Control wheel and control wheel’s arm: The control wheel should stick to plate. There are three chooses (diagram 2).

4） Self-stop switch

There are spacing switches on each fringe of the machine. ( welding stop switch)

5） Operating panel( illustration in full in after chapters)

6） Torch

7） Metal plug: This plug is external plug. The cable is used to connect trolley with feeder and provide power for them.(There are two branches, one connecting feeder and another connecting power.)

There are spacing switches on each fringe of the machine. ( welding stop switch)

5） Operating panel( illustration in full in after chapters)

6） Torch

7） Metal plug: This plug is external plug. The cable is used to connect trolley with feeder and provide power for them.(There are two branches, one connecting feeder and another connecting power.)

Technical specification

Specifications

Weight	12.6 Kg
Driving method	Four rubber rims driving
Hauling power	30 Kg
Running speed	100～1500 (mm/min)
Tracking mode	Guide wheel type
Height of torch	Three chooses
Adjusting scope of torch	Horizontal angle: 40°～55° Up /down moving: 45mm Front/rear moving: 45mm
Torch	Bended welding torch or straight welding torch
Locked equipment of torch	Suit for bended welding torch or straight welding torch
Needed welding length	Front-end:127mm; end:127mm
Self-stop function	By spacing parts of front-end and after end.
Size(lengthwidthheight)	500x280x520