Flat groove welding carriage

Flat fillet welding carriage

Pipe horizontal welding carriage

Vertical welding carriage

Double side welding carriage

Custom-made welding carriage

HK-5T-II Double side auto welding carriage

HK-5T-II which is suitable for continuous horizontal fillet welding structure is double side welding device.Volume is small; weight is light; moving and installing are convenient.Carriage can weld while walking forward and backward.Carriage’s movements have high stability because of synchronous four-wheel drive.Permanent magnets are installed in the lateral magnetic roller, and the guide wheels are at the top of roller, to avoid the car away from the welding line.

Send an enquiry

Video

Description

Outside drawing

1.Drive part: It is a device to drive the carriage, constituted by two sets of magnetic wheels, transmission gears, and the drive motor. Due to large magnetic wheel suction, they can firmly adsorb on steel plate, to ensure that the carriage will not change its walking path.

2. Guide wheel: the carriage starts, because the carriage's own weight focus on the two guide wheels, guide wheels guide the carriage to run along the steel plate end face.

3. Electrical box: the machine's electrical components are installed in it, at the same time to ensure that the electrical components are not affected by dust.

4. Control panel: It can adjust all actions of carriage. Please refer to “explanation of control panel”.

5. Welding gun cable clamp: a device to fix the welding gun cable, for the convenience of welding gun, the screw type cable clip is adopted.

6. Portable handle: it is convenient for the machine to be transited and carried.

7.Lifting lever: it is connected with the welding gun holder, through its lifting movement, can adjust the height of welding gun, to ensure that the gun and seam are in the best position.

8. Transverse bracket seat: can adjust two welding guns left side and right side distance.

9. Mobile lifting seat: adjust the welding guns up and down distance.

10. Angle adjustment device: can fine-tune the angle of welding gun and seam.

11. Work piece

12. The Gun: the Keep the gun or curved gun, the customer make choice of purchase.

Suitable condition

Technical specification

Main technology parameter

TYPE	HK-5T-II
size	330mm×280mm×160mm
Power	DC24V
Weight	10KG
Range of welding torch adjusting	up-down：200mm	range of working angle：360°
	left-right：120mm	range of adjusting angle：10°
walking speed	50～1900mm/min（nixie display indicator）
Moving	our-wheel drive(rubber wheel)
Operating function	No.1welding/not welding	No.2 welding/not welding
	start walking	stop walking
	choose walking direction（left-right）	walking speed (0～850mm/min)

Welding parameter

welding wire diameter welding parameter		Φ1.2mm	Φ1.4mm	Φ1.6mm
current（A）	downhand welding	120-300	150-380	180-430
	flush fillet welding	120-280	150-320	180-380
	horizontal welding	120-280	150-300	180-330
voltage（U）	U＝14+0.051 300A under U=0.041+16±1.50 above 300A U=0.041+20±2.0
distance between nozzle and workpiece（H）	Below 200A:　H=10～15mm 200～350A　 H＝15～20mm 350～500A　 H＝20～25mm
welding extension length（L）	The length is about 10 times welding wire diameter. It is L=10d