Pipe end preparation beveler

Split frame beveling machine

Plate beveling machine

ISD Model electric split frame pipe beveling machine cold cutting beveler

The ISD/GPX sModel electric split frame pipe beveling machine cold cutting beveler has many functions. It is widely used to cutting, machining groove and flange. There is a big range of the thickness of pipe. The characters are following:1）The light makes the machine is a perfect tool with a small clearance of radial. 2）The simple design reduces the complexity by 40% and improves the compatibility. 3）The ISD-600 groover cutting machine can cut the pipe with 600MM diameter. 4）Adjustable pillow is combined with reinforced bottom pillow. They improve the dependability and serviceability. 5）Fix the system and button up the pipe easily. 6）The slid platform of blade adapter is high strength. The life of it is long. The accuracy is high. 7）You can adjust the fastening parts by a standard spanner. It can choose to electric drive or air-powered drive.

Send an enquiry

Video

Description

The ISD-150 use the Metabo motor as the beveling driver.

1）chuck screw：The screws are distributed all around of annulus. Adjust the distance one by one until the pipe is locked.

2）blade carrier of groover：There are two blade carriers. One is used for equipping groove blade, another is used for equipping cut-off blade.

3）tension block：There are four kinds of block and any kind has four pieces. You can choose suitable block according to the diameter. These blocks have the ranges of diameter,

which are shown on surface of the block.

4）cut-off blade

5）feeder lever：The machine stops feeding when the lever is put outward and feeding when the lever is on the low order.

6）motor

7）hanging ring

The other ISD split frame pipe beveling machine model use the serve motor control box and remote controller to adjust the beveling spped. In this way the machine could make better performance and get long machine running life.

1）chuck screw：The screws are distributed all around of annulus. Adjust the distance one by one until the pipe is locked.

2）blade carrier of groover：There are two blade carriers. One is used for equipping groove blade, another is used for equipping cut-off blade.

3）tension block：There are four kinds of block and any kind has four pieces. You can choose suitable block according to the diameter. These blocks have the ranges of diameter,

which are shown on surface of the block.

4）cut-off blade

5）planet reducer casing parts

6）motor

7）hanging ring

8）feeder lever：The machine stops feeding when the lever is put outward and feeding when the lever is on the low order.

9）Serve motor control box

10）remote controller

Internal beveling device